Polish Tooling Workshop Orders 18 Tons 6061 T651 Stress Relieved Aluminum Plate 6-25mm for Mould Bases

November 17, 2026
son şirket davası hakkında Polish Tooling Workshop Orders 18 Tons 6061 T651 Stress Relieved Aluminum Plate 6-25mm for Mould Bases
Polish Tooling Workshop Orders 18 Tons of 6061 T651 Stress Relieved Plate for Mould Bases

Client background. The client is a mould-making workshop in Poland producing automotive interior and appliance moulds for customers across Central Europe, with three CNC gantry mills and a spark eroder running twenty hours a day. Their mould base plates came from European stockholders: convenient, but priced above mill level and inconsistent in flatness. Plates that looked flat were bowing up to 8 mm after the first face milling pass, costing a re-fixturing shift on every mould.

Project requirements. The enquiry called for 18 tons of 6061-T651 plate in five thicknesses from 6 mm to 25 mm:

  • 6 mm and 10 mm plate, 1520 mm x 3020 mm, for cavity inserts and ejector housings
  • 15 mm and 20 mm plate, 1520 mm x 3020 mm, for core and cavity backing plates
  • 25 mm plate, 2000 mm x 4000 mm, for main mould bases and bolster plates

Three conditions were non-negotiable: stress relieved plate with flatness held to 3 mm per running metre and a measurement record supplied plate by plate; a mill test certificate to EN 10204 3.1 with heat number traceability, because their automotive customers audit material documentation; and saw-cut sizes within ±1 mm delivered in 25 days, since the moulds were already scheduled into assembly.

Solution provided. We supplied 6061-T651 plate rolled on our 1850 double-coil hot rolling mill, solution heat treated and artificially aged, then stretch levelled so residual stress was released before shipment rather than in the client's machine. Chemistry was checked heat by heat on the in-house spectrometer, with tensile strength at 310 MPa minimum, yield at 276 MPa minimum and Brinell hardness tested lot by lot. Flatness was measured on a granite table per plate and recorded on the inspection sheet travelling with the bundle, thickness held to ASTM B209, and cut sizes produced on CNC saws to ±1 mm with chamfered, deburred corners, so plates went straight onto the client's fixtures.

Production control and documentation. The 15 mm and 20 mm plates were critical, carrying cavity pockets where any movement after machining ruins the mould. They ran on one rolling campaign, were stress relieved as a batch and machined last, then loaded on top of the stack as the first bundles opened on arrival. Each bundle carried alloy, temper, heat number, size, weight and the client's shipping marks, with a 3.1 certificate, flatness inspection report, packing list and certificate of origin in the document set.

Packing and shipment. Plates were wrapped in PE film with paper interleaved, edge boards and corner protectors fitted, and bundles of up to 2 tons steel strapped both ways on seaworthy plywood pallets; cut sizes travelled in ISPM 15 marked wooden crates. The mixed thickness and size list was planned into two 20GP containers to balance weight against volume, with desiccant added for the ocean leg and packing photos approved before the doors closed. The order left Qingdao on day 18 and reached Gdansk within the agreed window.

son şirket davası hakkında Polish Tooling Workshop Orders 18 Tons 6061 T651 Stress Relieved Aluminum Plate 6-25mm for Mould Bases

Results and value delivered.

  • 18 tons delivered in five thicknesses and three cut sizes in one shipment, with no mixed-heat bundles to sort on arrival.
  • Incoming inspection passed first time, with flatness measured at 2.1 to 2.7 mm per metre against the 3 mm requirement and no claim on thickness, surface or dimensions.
  • Post-machining movement disappeared: cavity pockets held position through finishing, removing the re-fixturing shift per mould that had been standard before.
  • Material cost per kilogram dropped against their European stockist price even after freight and duty, and one supplier now covers both 6061-T651 and the 5052-H32 fixture plate for marine work.
  • A repeat order for 12 tons of 15 mm and 20 mm plate followed eleven weeks later, with the same flatness and documentation clauses written into the purchase order.

son şirket davası hakkında Polish Tooling Workshop Orders 18 Tons 6061 T651 Stress Relieved Aluminum Plate 6-25mm for Mould Bases

Why the client chose us. They compared four mills. What decided it was the willingness to put flatness and stress relief in writing, supply a 3.1 certificate with heat traceability, and cut to ±1 mm so plate arrives ready to fixture. With 450,000 tons of annual capacity, stock shipping in 5 to 8 working days and cut-to-size in 15 to 30 days, switching away from a European stockholder became a manageable risk rather than a gamble.

Conclusion. This Polish project shows how stress relieved 6061-T651 plate from 6 mm to 25 mm, cut to size and backed by a flatness record and a 3.1 mill certificate, solves the real problem behind mould base buying: not the price per kilogram, but whether the plate is still flat after the last machining pass. If you source tooling plate, mould bases, jig plates or structural plate in this thickness range, send your drawing and we will confirm stock, flatness record and price the same working day.